AutoPage C3-RS915LCD - Manual (Page 14)

C3 RS915 REV. O1 14
times within 5 seconds icon flashing Temperature of the vehicle
Press FOUR more
times within 5 seconds
Start timer and
icon flashing
Press button to activate or
cancel daily start.
Table 4: FOUR beeps to confirm (Press and hold until FOUR Beeps are heard)
F
Button LCD display Button
Press and hold the
F
Button for 4 second
until 4 beeps sounded
DEMO mode Press button to activate
Backlight will be ON until DEMO
operation end.
Table 5: Do-Re-Mi sounds to confirm
F
Button LCD display Button
Press and hold the
F
Button for 6 second
until Do-Re-Mi
sounded
DEFLT flashing Press & hold button for 2
seconds to back to default setting
and 1 chip for confirm
D. PROGRAMMING LCD REMOTE:
Selecting and Adjusting Menu options:
� Press and hold F
button for 1 second until 2 beeps sound, then release the
F
button.
� The text will flash on the LCD screen, press button to enter the menu.
� Press button to move up in the menu or button to move down in the menu.
� Press button to select the option you would like to adjust.
� Press button to increase the value, to activate or deactivate a function or to toggle
through
the selection.
� Press button to decrease the value, to activate or deactivate a function or to toggle
through the selection.
� Press button to move to the next sub-option or go back to the main menu.
EXIT: Press
button to exit the menu mode.
Order Menu Option LCD display Functions
1 Parking Menu PARK METER Default is
- Parking hours 0:30
0 is flashing
, - Adjusts parking hour
(value from 0 to 2).
- Parking
minutes
0:30
30 is flashing
, - Adjusts parking minute
(value from 0 to 59).