Austroflamm Glass - Manual (Page 8)

Glass 6 english
Heating in-between seasons
Heating the stove in in-between seasons, when the
outside temperatures are higher, the flue gases may
not be able to escape completely and this may lead to
disturbances in the chimney draught, especially if the
temperatures are rising suddenly. The stove has to
be charged with less wood and the primary air has to
be increased so that the wood can burn down faster
(with visible flames) and thus the chimney flue can
stabilize.
Chimney fire
A chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel is
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an
expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Keramott
Description Nr.drawing Part number
Bottom rear, Keramott 1 714807
Bottom left, Keramott 2 714808
Bottom right, Keramott 3 714809
Wood retainer, Keramott 4 714805
Rear, Keramott 5 714810
Baffle plate, Keramott 6 714806
Grate 7 716408
Other parts
Description Nr.drawing Part number
Glass door 8 714862-29
Door handle 9 714863
Glass BA1 door spring 10 714861-15
Glass door glass front 11 714820
Glass door side left or right 714821
Glass cleaner ½ litre -- 640070
Stove lacquer -- 650002
Wood lighter can à 100 pcs. -- 640162
Gaskets
Description Nr.drawing Part number
Flat gasket 8x2 mm (1,7 m) 12 710096
Gasket round Ø=14 mm (1,6 m) 13 718429
Accessories
You can obtain floor plates of glass or steel or care products from your certified dealer.
IMPORTANT: Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely. The fireplae must not be amended.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
Keramott numbering = order of installation!