Drolet HT1200 - Manual (Page 24)

HEATING
Controlled combustion is the most efficient technique for wood heating because it enables
you to select the type of combustion you want for each given situation. The wood will burn
slowly if the wood stove air intake control is adjusted to reduce the oxygen supply in the
combustion chamber to a minimum. On the other hand, wood will burn quickly if the air
control is adjusted to admit a larger quantity of oxygen in the combustion chamber. The air
intake control on your stove is very simple. If you pull on it out completely towards you, it is
fully open. If you push on it until it stops the combustion air is reduced to a minimum.
The following burn rates will be achieved according to control setting.
Burn rate
Model
Low Medium Medium high High
HT-1200
HT-1200 DELUXE full close 7/16" 7/8" full open
HT-1600
HT-1600 DELUXE full close 1/4" 5/8" full open
HT-2000
HT-2000 DELUXE full close 1/2" 1" full open
HT-1200 and HT-1200 DELUXE Air control
OPENING
HT-1600 and HT-1600 DELUXE Air control
OPENING
HT-2000 and ht-2000 DELUXE Air control
OPENING
Please note that the HT-1200 and HT-2000 series stoves do not have the same operating
range. The HT-1200 type stove burned between 0.69 kg/h and 2.69 kg/h, the HT1600
between 0.93 and 3.32 kg/hr during EPA testing. The 2000 serie achieved between 0.95
kg/h and 4.9 kg/h under the same conditions . Real operating conditions may give very
different results than those obtained in the lab according to the species of wood used, its
moisture content, the size and density of the pieces, the length of the chimney, altitude,
outside temperature
23