beautypg.com

AMT Datasouth M1 User Manual

Page 15

background image

11

3.2.4 Loading Media in Cutter Mode (Optional)

1. Refer to section 3.2.1 to load the media.
2. Lead the media through the cutter paper opening.


3. Close the top cover gently.

4. Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start

the “Diagnostic tool” Select the “Printer Configuration” tab Click the “Calibrate Sensor”
button)

Note:
Please calibrate the gap/black mark sensor when changing media.

Cutter paper opening

See also other documents in the category AMT Datasouth Printers: