Amplicom NL 10 Induction Neckloop for PowerTe Series - Manual (Page 8)

Service Center 8
G
ENERAL INFORMATION
Using the NL100
The NL100 uses an induction loop system which will work together with a
hearing aid, when set to the T position, to help the user hear sounds more
clearly.
1. Slide the ON/OFF switch to ON. The green power LED will light up.
Important: If the power LED turn red, the battery power is
low. The battery should be changed as soon as possible.
2. Switch the hearing aid to T or MT mode.
3. Adjust the volume using the wheel on the NL100.
4. The NL100 is now ready for use and can be used to speak to callers with
the built-in microphone.
5. Slide the ON/OFF switch to OFF at the end of the call to save battery
power. The power LED will go out.