Amplicom TCL 100 Wireless Alert Alarm Clock - Manual (Page 11)

1-866-AMPLICOM (267-5426) 11
Setting the fl ashing light
ON OFF
Slide the switch to set the light in the snooze button to fl ash
during an alarm. There are two settings available: (from left to
right) On and Off.
Setting the snooze delay
SNOOZE
0m 5m 15m
Slide the snooze delay switch to set the snooze delay. There are
three settings available: (from left to right) 0 min, 5 min, or 15 min.
Activating the snooze delay
Important: if the Snooze button is pressed when the light is switched off,
the clock face will illuminate for 30 seconds to allow the user to see the
time. After 30 seconds the illumination will go out.
SNOOZE
Press the snooze button to stop the alarm for a specifi ed time
before it resumes. To activate the snooze function, see “Setting
the snooze delay”.
Activating the vibration pad
After connecting the vibration pad, use the switch on the vibration
pad to turn the vibration function on and off. There are two
settings available: (from left to right) On and Off.
Clock functions