De-register a handset – Amplicom PowerTel 701 Expandable Handset User Manual
Page 11

a
ddinG
a
h
andset
PowerTel 701 Cordless handset and charger base
Adding a Handset – Cordless Phone
Only register a handset if it has become de-registered from the base or if it was
purchased separately.
At the handset:
1. Press and hold
MENU
for approx 10 seconds until the display shows Press and
hold Page key.
At the base:
2. Press and hold
PAGE
for at least 10 seconds until the display shows Register.
De-register a handset
De-register a handset if too many are currently registered on the phone system.
1. Open the menu by pressing
MENU
, then scroll using
REDIAL
or
REDIAL
TONE
CID
INT
FLASH
until Handset
is highlighted and press B or OK.
11
2. Scroll using
REDIAL
TONE
CID
or
until Registration is highlighted and press B.
Then scroll
REDIAL
to highlight De-register and press B.
3. Enter the PIN code (default PIN 0000) and press B.
4. Enter the handset’s internal number (e.g. 1) and press B to confirm.
1-866-AMPLICOM (267-5426)