Alwarerc Streak 800Pro Hexacopter Combo - Manual (Page 14)

4.6 Assembly Steps – Motors & Propellers.
Step 1.
Prepare 4pcs M3x8mm HexCap Screws with
4pcs 3mm Washers to install the motors to the
Motor Mounts. Step 2.
Insert a M3x8mm Screw into a 3mm Washer
then insert to the motor mount slot as to mount
the Motor to it.
(Apply little amount of Thread
Locker when assembly metal to metal parts.)
Step 3.
Secure the motor to the motor mount with
4pcs screws and washers. Step 4.
Insert the Motor Wires into the slot of motor
mount and connect with motors.
14