Alwarerc Brushless Upgrade Kit for Lensman-X 3-Axis Gimbal - Manual (Page 25)

STEP 10: Gimbal Tuning Software
Specification for the Simple Brushless Gimbal Controller with [Brushless Upgrade Kit for Lensman-X 3-Axis Gimbal]:
Board: version 1.0
Firmware: 2.2 b2
(Cannot upgrade via the GUI software or will damage the board!)
Tuning Software: SimpleBGC GUI v2.2b2 (Other version will not work for this board!)
Input Voltage: 11.1V 3S Lipo with JST Connector (for the Default Setting)
Controllable Axis: Pitch Axis 0-90 Degree
IMU Mounting Orientation: At the bottom side of Camera Mounting Plate
Default PID and Power Setting used for: DSLR Camera with Lens 0.8-1.4kg
(Remarks: For other camera out of this range will need to have different PID setting.)
25