DYSON water filter - Manual (Page 10)

Emptying the clear bin
TM
Shroud cleaning
(when necessary)
To remove any build-up of lint or
large dust particles on the shroud:
Ensure the clear bin is empty
and the clear bin base is open.
A Press the bin release catch to
remove the clear bin.
B Clean the shroud with a cloth
or dry brush to remove the
lint and dust.
CAUTION
• Do not use the machine
without the clear bin in place.
To reassemble the clear bin,
place on the floor with the clear
bin base closed.
C Holding the carry handle, put
the cyclone assembly inside the
clear bin, line up the front and
rear catches and push down
to click the catches into place.
D Ensure the clear bin is
secure before replacing on
the machine.
The British Allergy Foundation is a
UK national charity with the aim of
improving awareness, prevention
and treatment of allergies.
The British Allergy Foundation Seal
of Approval is a UK registered
trademark.
Clear bin cleaning
(optional)
• You may rinse the clear bin
with water. Rinse only the
clear bin – do not rinse the
inner cyclone, shroud or cones.
• Do not use detergents.
• Do not immerse any other
part of the machine in water.
• Ensure the clear bin is
completely dry before
replacing.
A
B
C
D
11