ADLINK IMT-1 - Manual (Page 33)

Wireless Connections 23
IMT-10T
4. The tablet will scan for and display the IDs of all avail-
able Bluetooth devices within range.
5. On the list of discovered devices, touch the ID of the
device you wish to pair with.
6. If prompted, enter the pass code of the device (usually
0000 or 1234). Refer to the documentation that came
with the device.
7. If the pairing is successful, your tablet will connect to the
device.
4.4 GPS
To turn GPS on or off, touch the icon on the Quick Settings
widget on the Home screen.
Or perform the following steps:
1. Touch on the Home screen and open Settings
2. Touch Location Access under PERSONAL. Slide
the Access to my location switch on or off.
When the GPS radio is turned on and your device finds a network
that you previously connected to, it will re-connect to it.
NOTE: NOTE:
Leaving the GPS radio on will consume more power. To save
battery power, turn it off when not in use.