Delta 4000 Metal Detector - Manual (Page 4)

4
ASSEMBLY
Assembly is easy and requires no tools.
●
1 Loosen both Locking Collars by rotating 100%
counterclockwise
●
2
Insert the Upper Stem into the S-Rod and click
Silver Button into hole
●
3 Position the lower stem with the silver
button toward the back.
Using the bolt and knurled knob, attach
the search coil to the lower stem.
●
4 Press the button on the upper end of
the lower stem, and slide the lower
stem into the upper stem.
Adjust the stem to a length that lets you
maintain a comfortable upright posture,
with your arm relaxed at your side, and
the search coil parallel to the ground in
front of you.
●
5 Wind the cable securely around the
stems.
●
6
Insert the plug into the matching
connector on the back of the detector
body. Be sure that the key-way and pins
line up correctly.
●
7 Tighten both locking collars.
●
8
Secure the cable with the 2 velcro straps
provided, one on the lower stem close to the coil,
one on the upper stem, close to the housing.
Caution: Do not force the plug in. Excess force
will cause damage.
To disconnect the cable, pull on the plug.
Do not pull on the cable.
Locking
Collar
Locking
Collar
Upper
Stem
Cable
Knurled
Knob
Bolt
Coil
S-Rod
Velcro
Strap
Velcro
Strap