Dual MDM300 - Manual (Page 14)

14
MDM300 OPERATION
SD Card / USB Operation
To play MP3/WMA files from most USB mass storage
devices, line up the USB connector and insert the USB
device into the USB port.
To play MP3/WMA files from an SD Card, insert the card
horizontally with the label facing up into the SD Card slot
located behind the front panel.
When a USB device is first connected, “LOAD” will appear in
the display and playback will begin momentarily. To begin
playing music from an SD Card, press MODE to select SD
mode and begin playback. Depending on the number of files
and folders, it may take several seconds for the device to
begin playing. If no valid MP3/WMA files are detected, “NO
FILE” will be displayed and the last mode will be resumed.
Press TRACK
ll
to skip to the beginning of the next
track. Press TRACK
nn
to return to the beginning of the
current track. Pressing TRACK
nn
again skips to the
beginning of the previous track.
Press and hold TRACK
ll
or TRACK
nn
to fast forward
or reverse a track.
Press
l
/ II to temporarily stop playback.
Press
l
/ II again to resume playback.
ID3 tag and file/folder information will automatically be
displayed during playback. Press BAND to manually select
and display the song information.
Press +10 to skip ahead 10 tracks.
Press -10 to skip back 10 tracks.
Press INT to play the first 10 seconds of each track. Press
INT again to turn the Intro function off.
Press RPT to continuously repeats selected track. Press
RPT again to turn the Repeat function off.
Press RDM to play all tracks in random order. Press RDM
again to turn the Random function off.
Connecting a USB Device
(sold separately)
Inserting an SD Card
(sold separately)
Playing Music
Track Select
Fast Forward and
Reverse
Pause
Displaying Information
Track Jump
Intro
Repeat
Random