Using bios, Advanced chipset setup – Acrosser AR-B5495 User Manual

Page 39

Using BIOS

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page

with caution. Any changes can af fect the operation of your computer .

Configure DRAM Timing by SPD (Enabled)

When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial

Presence Detect) is located on the memory modules, BIOS reads information coded

in SPD during system boot up.

Advanced Chipset Setup

DRAM Frequency

Auto

Configure DRAM Timing by SPD

Enabled

DVMT Mode Select

DVMT Mode

DVMT/FIXED Memory

128MB

HPET

Enabled

Boot Display Device

CRT

Flat Panel Type

Type2

Help Item

Options

Auto
400 MHz
533 MHz

DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency . The default setting is auto and

we recommend users leave the setting unchanged. Modify it at will may cause the

system to be unstable.

DVMT Mode Select (DVMT Mode)

This item allows you to select the DVMT operating mode.

DVMT/FIXED Memory (128MB)

When set to Fixed Mode, the graphics driver will reserve a fixed portion of the

system memory as graphics memory , according to system and graphics requirements.

Press to return to the main menu setting page.

HPET (Enabled)

This item enables or disables HPET (High Performance Event Timer) support.

Boot Display Device (CRT)

This item is to set the system display device during boot up and the value may be

updated according to the setting of OS driver .

Flat Panel Type (Type2)

This item allows you to select the Flat Panel Type. The numbers in the options mean

the maximum resolution which the Panel can support.

: Move

F10: Save and Exit

+/-: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

mnkl

ESC: Exit