How to assemble, Hose assembly and tool storage, Not available on all models – Dirt Devil Swivel Glide User Manual
Page 5
HOW TO ASSEMBLE
TOOL REQUIRED: PHILLIPS SCREWDRIVER
1. Stand unit in upright position and place upper handle onto upright (Diagram 1).
2. Hold cord down and out of the way to avoid pinching. P
ush upper handle onto upright, aligning
on/off switch with handle ope ning (Diagram 2).
3. BACK OF UPRIGHT: add TWO screws (supplied) to secure handle (Diagram 3).
1.
2.
3.
Back of
upright
screws
5
HOSE ASSEMBLY AND TOOL STORAGE
1. ATTACH HOSE: Attach the flexible hose to the cleaner (Diagram 1). Match the long arrow on the cuff to the arrow on the inlet (Diagram 1a).
Push down firmly on the cuff
and turn clockwise. Insert the hose handle into the side of the cleaner.
Press down firmly to secure (Diagram 2).
2. ATTACH TOOLS: Refer to page 4 (Fig. 4 or 5) for tool placement.
3. CORD STORAGE: For tidy cord storage, wrap cord around hooks on side of cleaner with quick cord release (Diagram 2).
*Not available on all models
Hose
Inlet
1.
2.
Line up slots
with tabs on
hose inlet
1a.