6 pci/plug and play – Acrosser AR-B1790 User Manual

Page 30

Text mode
Original mode

AR-B1790 User’s Guide

Resume On LAN

If you are using a LAN card that supports the remote wake up function, set this field to Enabled. The will allow the
network to remotely wake up a Soft Power Down (Soft-Off) PC. However, if your system is in the Suspend mode,
you can wake up the system only through an IRQ or DMA interrupt.

5.6 PCI/PLUG AND PLAY

This section is used to configure PCI / Plug and Play features. The option configures the
PCI bus slots. All PCI bus slots on the system use INTA#, thus all installed PCI cards must be set to this value.

PCI / Plug And Play

Clear NVRAM

This sets the operating mode of the boot block area of the BIOS FLASH ROM to allow programming in the Yes
setting.

Init. Graphics Adapter Priority

Internal VGA

PCI / Int-VGA