Daewoo 51M200A - Manual (Page 16)

16
FIRST
TIME
USE
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO SOURCE TO INPUT1~INPUT5
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the
Projection Monitor below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID4 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
P
B
P
R
P
B
P
R
Y
R (MONO)/L
S-VIDEO
S-VIDEO
S-VIDEO
Y/VIDEO
R (MONO)/L
R (MONO)/L VIDEO
R L VIDEO
INPUT1
INPUT2
INPUT3
AUDIO
AUDIO
AUDIO
AUDIO
TO HI-FI
VCR
OUTPUT
R L V
R (MONO)/L VIDEO
INPUT4
MONITOR
OUT
L
R
DVI-HDTV