Acrosser AR-B1520 - Manual (Page 22)

AR-B1520 User’s Guide
5.6 EXIT SETUP
When you have made all of your selections from the various menus in the step program, save your changes and
exit Step. Select Exit from the menu bar by to display the following menu.
Exit Setup
NOTE
Pressing does not immediately exit this menu. Select one of the options from this menu or
from the legend bar to exit this menu.
Save & Exit Step
Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected
are saved to the CMOS RAM. The COMS RAM is sustained by an onboard backup battery and stays on even when the
PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit.
NOTE If you attempt to exit the Setup program without saving your changes, the program prompts you with a
message asking if you want to save your changes before exiting. Pressing saves the changes while
exiting.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup menus. When you select this
option or if you press < F5> , a confirmation window appears. Select [Yes] to load default values. Select Save & Exit
Step or make other changes before saving the values to the non-volatile RAM.
Exit Without Saving
This option allows you to discard the selections you made and restore the previously saved values. After selecting this
option, a confirmation appears. Select [ Yes] to discard any changes and exit.
22