Acrosser AR-B1841 User Manual
Page 26
AR-B1841 User’s Guide
AR-B1841
26
Secondary Slave
menu
(described in Table 3)
the sub menu of detailed
options
Drive A & Drive B
None
360K, 5.25 in
1.2M, 5.25 in
1.720K, 3.5 in
1.44K, 3.5 in
2.88K, 3.5 in
Select what kind of floppy
type you install
Video
EGA / VGA
CGA 40
CGA 80
Mono
Select what type of
Display you use
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in
which you want the BIOS
to stop the POST
process and notify you
Base Memory
N/A
Displays the amount of
conventional memory
detected during boot up
Extended Memory N/A
Displays the amount of
extended memory
detected during boot up
Total Memory
N/A
Displays
the
total
memory available in the
system
Table 1 Main Menu Selections
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu
to configure each hard disk drive.
Figure 2 shows the IDE primary master sub menu.
IDE HDD Auto-Detection [Press Enter]
IDE Primary Master [Auto]
Access Mode [Auto]
Capacity 0MB