Acrosser AR-R5205FL - Manual (Page 6)

AR-R5205FL Installation Guide
2. Procedure of Assembly/Disassembly
2-1 Installing the 2.5”Hard Disk Drive (HDD)
The following are step-by-step installation
1. Remove the power cord out from the AR-R5205FL
2. Unscrew the two screws in top cover of AR-R5205FL, as shown in Fig-01.
Push(Open)
Push(Open)
Unscrew Unscrew
Fig- 01 Remove the top cover
3.Insert the rubbers into the HDD bracket, as shown in Fig-02-1.
4.Place HDD body into HDD bracket and lock HDD body and bracket by screws
(4pcs), as shown in Fig-02-2.
Install the rubbers on the HDD bracket.
Fig-02-1 Install the rubbers with HDD body
6