DeLonghi PAC260 - Manual (Page 8)

8
TEMPORARY INSTALLATION
Note: In both cases (permanent and temporary installations) make sure that the Pinguino is positioned
on level ground. If necessary use the two caster stops for the front casters
This installation makes it easy to use Pinguino in
any room, provided there is a window or a door:
it allows you to use the Pinguino immediately.
Suction discs may be used to keep window or
door closed.
fig. 5
fig. 6
fig. 7
window
bracket
S e t t i n g u p
Pinguino is equipped with an adjustable window
bracket. If you have a sash window, place the
bracket on the window sill, extend the bracket
fully within the window frame and lower the win-
dow onto the bracket. Insert the nozzle of the
exhaust hose into the slot, then connect the
hose to the air conditioner (fig.7). Thanks to the
wing nut, it’s possible to use the window bracket
also for sliding windows. Position the hole of the
bracket so to allow a correct installation of the
exhaust hose.
If you have a sash door, use the additional set
provided in order to extend the accessory to the
desired length; joining the two parts (fig. 8),
adjust the total lenghth according to your needs
then, fix the bracket with the relevant nuts, close
the door and connect the hose (fig. 9).
fig. 8
fig. 9
PAC260GB 24-04-2003 16:33 Pagina 8