Assembly – Ducane 436 INCH 2-BURNER 20211710 User Manual
Page 2
2
www.ducane.com
NOTE: Your model may differ from those in the assembly photos.
____________________________________________________________________
CAUTION: Although we make every effort to ensure that the assembly process
is as easy and as safe as possible, it is inherent with fabricated steel parts
that corners and edges can cause cuts if improperly handled during assembly
procedures. Be careful while handling any parts during assembly. IT IS STRONGLY
RECOMMENDED THAT HANDS BE PROTECTED WITH A PAIR OF WORK GLOVES.
____________________________________________________________________
____________________________________________________________________
WARNING: Care must be taken to ensure that this grill is assembled
according to these instructions. Failure to assemble the grill properly could
create a fire hazard or cause burns or other bodily harm.
____________________________________________________________________
1. Assemble selected base cabinet kit before proceeding with these instructions.
2. Open the hood and remove the bubble wrapped side shelf package(s), Sear
Grid
®
package, and accessory package.
3. Remove the cooking rack by pushing each leg from the burner box and sliding
out of the hood.
2.
3.
Assembly
Important
This grill head is designed
to be mounted only on a
Ducane
®
base cabinet kit. DO
NOT attempt to mount on any
other type of base cabinet or
in any other manner.
Read all instructions
before proceeding with any
assembly. For an assembly
view and verification of
parts, see the parts list and
expanded view of pages 9-10.