Dolby Laboratories 6000 - Manual (Page 3)

-2-
II. GETTING STARTED
CHECK ACCESSORIES
Remove your HDD video recorder carefully from the box, You may wish to store the packaging for future use.
In the box
Included in this package should be:
Table 1
HDD video recorder 1
Remote controller 1
AAA batteries 2
User’s manual 1
Read these instructions before use.
Switching on
Connect the 2-pin main plug into the main socket and switch on.
Press the power button on the front of the unit to turn the HDD video
recorder on or off.
USE REMOTE CONTROLLER
1. Open the battery compartment.
2. Insert two AAA batteries, make sure to match “+” and “-” of the batteries
to the marks in the battery compartment.
3. Close the battery compartment.
Notes:
1. Batteries can last for about 6 months generally. Change the
batteries of the remote controller if it does not work.
2. If the remote controller is not used for a long time, remove the
batteries to prevent battery leakage.
CONTROL HDD VIDEO RECORDER
Point it at the front of the HDD video recorder; press the relevant button to
choose demand function.
The remote controller will work up to 6 metres from the HDD video recorder
and at an angle of up to 45 degrees.
Do not block the path of the beam from the remote controller to the HDD
video recorder, dark walls direct sunlight or bright light will reduce the remote
control sensitivity.
1
2
3
Figure 1
Figure 2
Figure 3
45