Dish Network Solo 811 - Manual (Page 64)

Page 59
Using Caller ID
Page 59
6. Press the SELECT/OK button.
7. Enter the new password using the NUMBER PAD buttons.
As soon as you enter the fourth digit of the password, the receiver
highlights the
OK option.
8. Select the OK option to change the password.
9. Enter the new password again, using the NUMBER PAD buttons. The
receiver displays stars (*) as you enter the digits of the password. As
soon as you enter the fourth digit of the password, the receiver
highlights the
OK option. Press the SELECT/OK button.
Memorize the new password. From now on, you must enter this
password to lock or unlock the receiver.
Using Caller ID
Caller ID displays on your TV the names or phone numbers of people as
they call you if you subscribe to Caller ID from your local phone company.
To use this feature, make sure you have a phone line connected to the
receiver and that the
Caller ID feature is enabled. After you turn on Caller
ID , it stays on until you decide to turn it off.
Note For best performance, make sure your system is properly grounded.
Caller ID Screens
When you receive a call, you will see a Caller ID popup screen.
You can select OK to eliminate the message. If you do nothing, it will
disappear after 20 seconds.