Dymo 450 User Manual

Page 13

Text mode
Original mode

Clean your labelmaker from time to time to keep it
working properly. Clean the cutter blade each time
you replace the label cassette.
To clean the cutter blade
1. Press

to turn off the power.

2. Press

and

together. The message,

Cut Test, appears on the display.

3. Press and hold the

keys. The cutter

blade will move into view in small steps.

4. When you are able to access both sides of the

blade, release the keys.

5. Use a cotton ball and alcohol to clean both sides

of the cutter blade.

6. After cleaning the blade, press

to return

the blade to its home position.

You can also follow this procedure if the

cutter blade becomes lodged in the forward
position and will not move.
To clean the print head

♦

Clean the print head using the cleaning tool
located inside the label compartment lid. See
Figure 11.

Figure 11

Shift