Denso MOVINCOOL CLASSIC PLUS 26 - Manual (Page 35)

TROUBLESHOOTING AND REPAIR
27
10. Removal of Blower Assembly
A. Loosen the set screw using an allen wrench
and then remove the centrifugal fan.
B. Remove the two (2) nuts on the inside of the
housing in the locations shown.
A - NUT
C. Remove two nuts and two screws as de-
picted.
Then remove the motor bracket together with
the fan motor.
A - NUT
B - SCREW
Removal of Centrifugal Fan
Removal of Fan Motor Assembly
Removal of Blower Housing