Directed Video DP1020 User Manual

Page 39

NOTE: Specifications and design are subject to change without notice.

NOTE: The unit will automatically power off once the ACC is turned off (ignition key off).

Ensure that the RED (+ACC) wire is connected to ACC power.

System

Laser (If DVD is installed)

Semiconductor laser

Signal Formats

NTSC, PAL

Audio Characteristics

Frequency Response

(If DVD is installed)

DVD Video (PCM@ 96kHz)

20 Hz - 40 kHz ± 1dB

DVD Video (PCM@ 48kHz)

20 Hz - 20 kHz ± 1dB

Signal-to-Noise Ratio

90dB

Harmonic Distortion

0.01%

Dynamic Range

(If DVD is installed)

DVD Video

95dB

Line level A/V outputs

Audio (RCA jacks)

2 Vrms

Video (RCA jack)

1 V p-p @75 ohms

Line level A/V inputs

Audio (RCA jack)

2 Vrms

Video (RCA jack)

1 V p-p

General

Power Requirements

14.4 VDC, 3.35 amps

5A fuse

Power Consumption

42.6 watts

Dimensions

345 mm x 65 mm x 282 mm
(length/height/width)

15.25 in. x 3 in. x 18.75 in.
(length/height/width)

Mass

2.3 kg

3 lbs

Operating Temperature

0°–50°C

32°–120°F

Operating Humidity

10% to 90%