Specifications, Kodiak® els-60 – Dixon KODIAK 11806-106 User Manual
Page 17
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
KODIAK® ELS-60
CHASSIS:
11 GA - rectangular tube
SEAT:
Designed for operator comfort by use of high-density
closed cell foam padded back and arm rests, upholstered
with Cordura
TM
water-repellent fabric. Seat is adjustable
fore and aft. Mounted on operator suspension system.
MOWER DECK:
Made of 11 GA fabricated welded construction with external
reinforcement ribs. Three blades combine for a 60” cut
width. Cut height approximately 1.5” to 5” via 12 position
lift handle.
BLADE DRIVE:
Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a Parker 10cc
pump with fan and TE0230 wheel motor.
ENGINE:
Each mower is powered with a 26 HP Briggs & Stratton
ELS twin cylinder engine, overhead valve, air cooled,
gasoline, full pressure lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES:
Front 13 x 5 x 6 smooth tread (16-21 lbs)
Rear 20 X 12 X 10 Turf Master (8-14 lbs)
CAPACITIES:
Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:
Width
46” outside rear wheel measurement
(approximate)
Height
46.5”
Length
75”
Weight
760 lbs.