Installation, Continued – Desa SL30NT User Manual

Page 8

104463-01E

For more information, visit www.desatech.com

INSTALLATION

Continued

Figure 6 - Laying Down Stove On Side (Stove Style May Vary Depending on Model)

Front of
Stove Unit

Pallet Wood
Bolted to
Stove Body
Bottom

Top of Stove Unit

Front of
Stove Unit

Top of
Stove Unit

Drop Cloth/
Blanket

STOVE CAVITY ASSEMBLY

Lift off corrugated box enclosing stove body crating.

Remove all screws fastening the wood frame enclosure.
Spread wood frame open and lift away from plastic-bagged
stove body. The bottom pieces of pallet wood will remain
bolted to the stove body.

Remove plastic bag from stove body.

Remove back panel from stove (see Figure 5). Use an adjust-
able wrench or a 10 mm socket. Remove six (6) bolts and wash-
ers. Keep bolts and washers to reattach back panel later.

Remove all contents from inside stove cavity. Contents include:

(1) - Stove bottom

(4) - Legs

(1) - Bottom door

(1) - Top grate

(1) - Hardware kit bag with fasteners

Carefully lay stove body on back to attach bottom components
to stove body (see Figure 6). Rest stove on drop cloth or blan-
ket to avoid scratching stove edges.

Figure 7 - Removing Pallet Wood From The Bottom of The Stove

Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and
Door Attachment (Appearance May Vary Depending on Model)

Figure 5 - Removing Back Panel

Bolt

Product
Identification
Label

Back Stove
Panel

Pallet
Wood

Bolt

Bottom Of
Stove Unit

Front

Remove remaining pallet wood attached to bottom of stove
body (see Figure 7). Use an adjustable wrench to remove bolts.

Fasten each leg to stove with four (4) bolts. Use a flat screw
driver to tighten bolt to leg. Thread bolt in tapped holes on
stove body (see Figure 8 and Figure 9, page 9).

Leg Hole

Door Hinge
Step Bolt Hole

Door Catch Bolt
With Adjustable
Hex Nuts Hole

Stove
Bottom
Holes

Front

Bottom Of
Stove Unit

Pallet Wood

INSTALLATION

Stove Cavity Assembly

INSTALLATION

Stove Cavity Assembly