Digital Dream quantum 3.2 User Manual
Page 12
9
Taking Movies
Taking short movies is simple with your camera. Simply set your camera to Movie Mode, frame
your picture using the viewfinder or LCD monitor and press the shutter button to start recording.
When a movie is recording, the RED LED underneath the direction button will remain lit and a
time indicator will display on LCD monitor. To stop the recording, just press the shutter button
a second time.
To set your camera to Movie Mode:
1. When in Camera Mode, press the
Enter button. The first screen of the
Options Menu appears, with the
Shooting Mode submenu open.
2. Press the down direction button once
to highlight the Movie Mode icon
(
).
3. Press the Enter button again to exit the
Options Menu. The Movie Mode icon
(
) will display on the LCD monitor.
Shooting Spur of the Moment Movie Clips
You can temporarily switch your camera into Movie Mode
by pressing the PC mode/movie button. Press this hotkey
first then press the shutter button to start recording. To stop
recording, just press the shutter button again. When you
finish recording, your camera will revert to its previous
mode (e.g. Single Photo or Multisnap Mode)
Note
The PC Mode/Movie Button provides a rapid
way to enter Movie Mode, but Movie Mode must
be restored each time when it is used. If you
want to take several movie clips, set the camera
to Movie Mode following the instructions in
Taking Movies above.
PC Mode/Movie Button
Up Button
Enter Button
Right Button
Left Button
Down Button
Up Button
Enter Button
Right Button
Left Button
Down Button