D-Link DMP-110 - Manual (Page 21)

15
Voice Recording
Follow these steps to record Voice:
1. Make sure the LCD display shows Stop. Press Select button to
enter the DVR mode. The default memory is internal (In). Or
press the Select button again to use the external SmartMedia
Card.
2. Press Rec button until the LCD displays Record. The DMP-110
starts to record.
3. During recording, you may press Rec again to pause recording,
or again to continue recording on the same track.
4. Press the stop button to stop recording.
The DMP-110 will automatically generate a new track if one voice file
extends into internal and external flash memory. This will create two
separate tracks for the one voice file.
The LCD will display Mem FULL (Memory full) and stop recording once
the DMP-110 detects no free memory.
Voice File Playback Procedure
Follow these steps to playback Voice files:
1. Set the Player to DVR mode by pressing the Select button.
2. Press the Play button to playback the selected voice file.
3. During playback, you may press the play button again to pause
the DMP-110. Press the play button again to release the pause
function.
4. To stop the playback, please press the Stop button.
In DVR mode, the EQ button will not function.
Delete Voice files:
Follow these steps to delete Voice files:
1. Set the DMP-110 to DVR mode by pressing Select button.