Dual XIA4225 - Manual (Page 6)

6
XIA4225 INSTALLATION
Output Connections
The lighting elements of DUAL illuminite speakers provide you with a unique custom
touch to your vehicle. Dual’s patent pending illuminite LED system and control circuitry
provides an extraordinary blue-hue illumination which allows great creative opportunities
for the beginner and seasoned custom installer alike. DUAL XIA-series amplifiers provide
a dedicated switched 12VDC output including independent fused protection (2 amp)
specifically for use with illuminite speakers.
DUAL illuminite speakers have two distinct sets of input terminals. The first is labeled
audio input terminals and the second is labeled illuminite lighting inputs. The inputs are
clearly marked with a label positioned directly above the terminal housing. The polarity
(+ and -) indicators for each set of inputs also appear on these labels.
1. Do not connect the amplifier speaker outputs or any audio source to the illuminite
lighting inputs.
2. Refer to the figures below for making the connections. Make sure to observe polarity
as the illuminite circuitry will not operate when connected reverse polarity. Connect
either red wire from the XIA amplifier illuminite outputs to the positive (+) illuminite input
terminal and connect either black wire from the XIA amplifier illuminite outputs to the
negative (-) illuminite input.
Additional illuminite wiring notes:
Several illuminite speakers can be connected to the 12VDC illuminite output at one time.
Refer to the table below for the individual illuminite speaker current requirements.
If you are unsure, consult a qualified professional or call DUAL technical assistance at
1-866-382-5476 for further information.
OUTPUT CONNECTOR
(Plugs into amplifier)
XiNC112 - 55mA
XiNC110 - 55mA
XiNBP210 - 180mA
XiNBP212 - 180mA
XOBP12D - 130mA
illuminite current
requirements
(per speaker)