Dixon 5421 - Manual (Page 25)

TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any multi-blade mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the
variables that interact creating differences in cut quality. Examination of one or more of the
above will generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR Dealer is also available to provide assistance to you.
SITUATION CAUSES REMEDY
Poor cut quality Ground speed Reduce mowing speed
Poor cut quality Loose belts Adjust per operators manual
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality Dull or bent blades Sharpen or replace as required
Poor cut quality Unlevel mower deck Adjust per operators manual
Poor cut quality Grass build-up under
mower deck Clean out underside of mower deck
Poor cut quality Improper blades Replace with original equipment
blades which are designed for the
Model 5421
Poor cut quality Uneven tire pressures Check and adjust as required per
operators manual
Page 22