Names of parts and operation technique – Daewoo RC-400B User Manual

Page 2

EXTENSION PIPE

NAMES OF PARTS AND OPERATION TECHNIQUE

• Turn the unit off(on) by pressing the

ON/OFF switch button on the unit.

• Slide the knob to control the suction

power.(RC-400B Series model)

• IF RED : Dust bag(or

dust box) is full. Change
bag or clean dust box.

• See the next page for

instruction on replacing
the dust bag or cleaning
the dust box.

• Insert nozzle holder in the clip which is

built onto the unit.

• Press the button in the direction shown by

the arrows and pull(or push) the pipe.

• Rotate the pipes in the direction shown by the

arrows and pull pipes(or floor nozzle) apart.

• If you slide the suction control on the hose, you can

control the force required to push the floor nozzle.

• Select the appropriate setting of the pedal

according to the surface to be cleaned.

Carpet

Hard Floor

Press

• Press the button and pull the hose adapter

out of the unit.

Hose adapter

Hose

Button

Lift

Pull

Motor protection filter

Press

Dust cover

Press

• Press the cord rewind button to rewind

the cord.

Cord

Slide

Hose

Pipe

Pull(Press)

Button

Clip

Nozzle holder

Suction
control

Press

• Lift the dust cover upward toward you

and take out the motor protection filter.

• Shake the filter to remove the dust.
• Place the motor protection filter in the

correct.

• Press the dust cover firmly.

HANDLE RELEASE BUTTON

FLOOR NOZZLE

CORD REWIND

ON/OFF SWITCH

DUST INDICATOR

CLEANING THE FILTER

PIPE/BRUSH CONNECTION

STORAGE