DYSON DC15 User Manual

Page 10

CAUTION

• Turn power off and unplug

before checking for
blockages. Failure to do
so could result in electric
shock or personal injury.

• If any part of your

machine becomes
blocked, it may overheat
and then automatically
shut off. Unplug machine
and leave to cool down for
at least 60 minutes before
clearing the blockage.

• For safety, please lay the

machine on its side before
checking for blockages.

• Please note: clearing

blockages is not covered
by your machine’s limited
warranty.

• Beware of sharp objects

when clearing blockages.

• Refit all parts of the

machine securely before
using it.

Check to see if tools, wand, and hose are clear
of blockages.

A To remove the hose, rotate base of hose downwards

until it clicks, then pull away from the machine.

B Squeeze release buttons to remove the airway

inspection and check inside.

C Pull the top end of the tube away from machine

and check inside.

D Undo soleplate fasteners

with a coin.

E Rotate endcaps and remove.

F Pull out brushbar sections.

G Cut out debris, avoiding

bristles.

tip

When replacing the
brushbars, insert them
so the ends with the
silver pin are facing
outside of the vacuum.

Clearing blockages