Dometic RM3962 - Manual (Page 4)

- 4 -
lEd diSPlay PanEl
lEd panel indications Status information
Display is on Refrigerator on
Display is off Refrigerator off
The auTO
indication
dot is lit. auTO mode and
aC operation
The auTO
and LP
indication
dots are lit. auTO mode and
Gas operation
The LP
indication
dot is lit. Manual gas operation
mode.
Digits
Fresh food temperature.
Thermostat range setting
indication (1 - 5).
Temporary during setting.
The thermostat settings
are stored automatically
after 5 sec. of inactivity.
Message indications:
60 is
displayed.
Temperature is above
measurement range
LP is flashing
(The message
alternates
between LP
and the temperature.)
Gas operation lock out.
(Check gas.)
REfRigERatoR ovERviEw
ON/OFF button (main power)
Press the button to turn the refrigerator on or off.
AUTO/GAS mode selector button
Press the button to turn the auTO mode on or off.
TEMP. SET button
The thermostat has 5 settings where
1 indicates the
warmest and 5 the coldest temperature setting.
Press the button repeatedly until the desired setting,
e.g.
3 , is shown in the LED display. This value is
shown for about 5 seconds and then the temperature
is displayed again, e.g.
43 .
1.
2.
3.
0 6
l P
3
4 3
contRol PanEl
1 3 2
E.g.
4 3
The LED display panel provides
a quick visual indicator of the
temperature of the food in the
fresh food cabinet, modes of
operation, status messages and
alarm conditions.