Dukane P42 - Manual (Page 20)

■ The input is switched by pressing the RGB1, RGB2, VIDEO1 or VIDEO2 button
on the remote control. Pressing the INPUT SELECT button on the monitor main
unit switches the input in the order of
RGB1
→ RGB2 → VIDEO1 →
VIDEO2
→ RGB1.
• When the same signal is input to RGB1 and
RGB2, the phase may in some cases shift
slightly but this is not a malfunction. In such
case, readjust the PHASE of the one being
used.
■ While the on-screen display system, ( ) is not on display, press the remote
controller VOLUME button or (or the main unit VOLUME button
▲ or
▼ to adjust the sound volume.
• The adjustment status will be displayed as
guidance while you press these buttons.
• While the guidance is on display, press
or
▲ to turn up the volume.
• While the guidance is on display, press
or
▼ to turn down the volume.
• You can also adjust the sound volume setting
via the on-screen display system .
• The sound volume adjustment mode will exit
when no keys are entered for 5 seconds. (The adjustment status guidance will disappear
automatically.)
VOLUME-
VOLUME+
VOLUME- VOLUME+
ENGLISH
10
OPERATING INSTRUCTIONS (continued)
Main unit
Remote
controller
VOLUME+
VOLUME-
VOLUME
RGB1 (D-sub input)
When using INPUT SELECT
RGB2 (BNC input)
VIDEO1 (composite or S input)
VIDEO2 (COMPONENT input)
Input Selection
Remote
controller
Main unit
RGB 2 RGB 1 VIDEO 2 VIDEO 1
INPUT SELECT
Volume Adjustment
12
14
VOLUME : 30
Sound volume setting
Adjustment status guidance
■ Press the remote controller MUTE button to mute the sound temporarily.
• When you press the button, [MUTE] (pink) and the
status of volume setting will be displayed in a
guidance image.
• While the sound is muted, press the button
to turn down the volume.
• While the sound is muted, press the button
to cancel the mute.
• You can also adjust the sound volume setting of the
mute via the on-screen display system .
■ Press the remote controller MUTE button once again and the mute will be canceled and
the guidance will change to VOLUME (blue), enabling the volume to be heard.
• When MUTE is used, the guide display will continue for 5 sec. and then turn off.
VOLUME+
VOLUME-
Sound Mute
Remote
controller
MUTE
MUTE : 30
Sound volume setting
(The display will turn to pink.)
14