DCS WD-27-SS-OD - Manual (Page 2)

Summer 2008 43
Ordering Data: Please specify gas type (natural or propane) when ordering.
MODEL NUMBER WD-27-SS-OD
DRAWER SPACE 1.6 CUBIC FEET
REMOVABLE SHELF/SERVING TRAY ✔
TYPE 304 STAINLESS STEEL ✔
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4" W.C.
• Supply Pressure: 6” to 9” W.C.
Power Requirements:
• 120V 60Hz
• 3 wire
• 15 amp circuit
MODEL NUMBER BGB131 BGB131-BI BGB132 BGB132-BI
30” CART MOUNT ✔ ✔
BUILT-IN ✔ ✔
SIDE BURNER(S) 1 @ 17,000 Btu/hr 1 @ 17,000 Btu/hr 2 @ 17,000 Btu/hr 2 @ 17,000 Btu/hr
SHIPPING WEIGHT (LBS) 35.4 35.8 60.6 64.0
SHIPPING DIMENSIONS (HEIGHT X WIDTH X DEPTH) 13.5 x 14.5 x 19 13.5 x 14.5 x 19 16 x 18 x 30 16 x 18 x 30
B
B
B
Note: the deck is
not required
8
8
Built-in Side Burner Dimensions 30” Cart Mount Side Burner Dimensions
Professional Side Burner
Island Preparation NOTE: Cart Mount Side Burners are not designed for built-in applications.
Warming Drawer Dimensions Warming Drawer Island Preparation
MODEL A B
BGB131-BI 12” 6” min.
BGB132-BI 22-3/8” 6” min.
POWER
CORD
A 120 Volt AC GFI
outlet should be
located below the
Warming Drawer
2 x 4’s or similar
support
min. cabinet depth
1-1/2” min. to
bottom of
countertop
Propane
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 10" W.C.
• Supply Pressure: 11” to 14” W.C.
BGB132-BI BGB131-BI BGB131 BGB132
BGB131 Single Side Burner
BGB132 Double Side Burner
BGB131-BI Single Side Burner
BGB132-BI Double Side Burner
magalog summer 2008.2.qxd 4/24/08 2:08 PM Page 43