Directed Electronics s650 - Manual (Page 10)

10
© 2003 Directed Electronics, Inc
CROSSOVER INSTALLATION
Review the Installation Precautions
section of this guide before proceeding.
Crossover Adjustment and
Wiring Connections
This Directed crossover has the ability to
work in car audio systems from basic
single amplifier systems to the most
sophisticated multiple amplifier systems
with signal processors and amplifier chan-
nels dedicated to each speaker.
Removing Trim Rings
Hold the tweeter housing while gently
turning the trim ring in a clockwise direc-
tion until it releases. The trim ring can
then be easily lifted away from the
tweeter housing.
Installing Trim Rings
„ FFlluusshh M Moouunntt AAsssseem mbbllyy - With the
arrow in the tweeter housing facing
up, place the trim ring into the
housing with the Viper logo at the
bottom and turn in a counter clock-
wise direction until the trim ring
clicks into place.
„ SSuurrffaaccee M Moouunntt AAsssseem mbbllyy - Insert the
trim ring into the housing and turn in
a counter clockwise direction until
the trim ring clicks into place.
To Tweeter To Woofer
To Amplifier
FIGURE 5—SINGLE AMPLIFIER