Denso OFFICE PRO 18 - Manual (Page 25)

TECHNICAL SPECIFICATIONS
ITEM/FEATURES Office Pro 18
Rating Conditions
dry bulb 95º F (35º C)
wet bulb 83º F (28.2º C)
humidity (60%)
Specifications
power frequency 60Hz
line voltage single phase 115 V
power consumption 1.7 KW
current consumption 15.6 Amps
power factor 95%
starting current 54A
power wiring 12 (3-core) AWG
Cooling Unit
cooling capability 4,230 Kcal/hr
16,800 BTU/hr
cooling system direct expansion
Blower
type of fan centrifugal fan
air volume: Evaporator (High speed) 540 ft 3 /min (913 m 3 /h)
Condenser (High speed) 770 ft 3 /min (1301 m 3 /h)
motor output (High) 0.24 KW
(Low) 0.19 KW
Compressor
type rotary
output 0.95 Kw
refrigerant type R-22
refrigerant capacity 1.54 lbs (0.70 kg)
Safety Devices
compressor overload protector included
fan motor protector included
anti-freezing thermistor included
full drain tank switch included
automatic restart (power interruption) included
compressor time delay program included
Dimensions & Weight
W x D x H (in) 21" x 27" x 44"
W x D x H (mm) 538 x 696 x 1118
weight (lbs/kg) 210 / 95
Operating Conditions
inlet air (relative humidity) 95º F (35º C), ≤ 60%
65º F (18,3º C), ≥ 60%
Control Device
temperature control included
programmable timer included
two speed fan included
19