Vom-784ct operations manual, Vom-784ct – ASA Electronics Voyager VOM-784CT User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VOM-784CT OPERATIONS MANUAL

FUNCTIONS AND OPERATION
Front of Monitor : See FIGURE 4

STAND- BY Monitor operates when vehicle transmission is switched into

"REVERSE" ON - monitor and system operate when ignition switch is "ON"

"CAT' used mainly for rear mounted camera or as specified by the installer.

"CA2", "CA3" & "CA4" and used mainly for side or mirror mounted camera or as specified by the installer.

Pre-set brightness and contrast levels optimized for day or night operation.

Adjustable tilt control to see upward image when use tilt camera.

Adjustable tilt control to see downward image when use tilt camera.

Variable control of contrast. Should be adjusted if the "DAY/ NIGHT"

switch does not achieve the most desirable picture.

Variable control of brightness. Should be adjusted if the "DAY/ NIGHT"

switch does not achieve the most desirable picture.

Variable control of internal speaker volume and output audio level.

1. Power switch

2. Camera selection

3. Day/ Night switch

4. UP switch

5. Down switch

6. Contrast

7. Brightness

8. Volume

FUNCTIONS

AND

OPERATION

CONTINUED

Rear of monitor : See FIGURE 4

9. POWER CONNECTION :

(6) (J) (4)

d) (2) (l)

Pin No.

Description

Power ( DC lOV ~32V)

Trigger3 (DC 12V ~24V)

Ground

Trigger4 (DC 12V~ 24V)

Trigger I (DC 12V~24V)

Trigger2 (DC 12V~ 24V)

VOM-784CT