DeVillbiss Air Power Company WG1420 - Manual (Page 7)

7
GENERAL PARTS IDENTIFICATION
9. Gas Tank- Refer to the Engine Operators' Manual
for suggested fuel.
10. Pressure Washer Pump- Delivers 1400 PSI at 2.0
gpm for optimal cleaning. Pump is shipped with oil.
No oil should be added to this pump.
11. Vibration Isolator- Isolators reduce frame
vibration and eliminates walking.
12. Wand & Nozzle- Metal thru construction with brass
thread connection and durable stainless steel nozzle
for added durability.
13. Pressure Regulator- used to adjust pressure of
water coming from pump. Can be adjusted from
100-1400 PSI.
14. Handle Assembly Instruction- Remove nuts and
bolts from parts bag. Install handle into position. Push
bolts through holes provided. Install hex nuts to bolts
and tighten.
1. Frame assembly- Protects pump and engine as
well as a means to handle complete unit.
2. Exhaust Muffler- Allows hot exhaust to exit the
engine.
3. Siphon Tube & Filter- Used to pick up deter-
gents, degreasers, etc. for cleaning.
4. High Pressure Hose- 25' x 1/4" dia. high pressure
hose used to transport water from pump to gun.
5. Quick Connect Coupler- Used to attach water hose
to pump.
6. Pressure Washer Gun- Used to control flow of
water coming from pump.
7. 3.5 HP Tecumseh Engine- This engine is shipped
without oil. Included with this pressure washer is a
copy of the Engine Manufacturer's Operators'
Manual. See this manual for more detail on the
engine.
8. Air Filter- Contains air filter element. Refer to the
Engine Operators' Manual for maintenance.