Dualit XL1500 - Manual (Page 3)

5 4
ingredients through the feed tube
• The processor features an overheat
cut-out that cuts the power if it
becomes too hot for any reason. If
this occurs turn the control knob to the
OFF position. Once it cools down, the
safety cut-out will automatically reset
itself within one hour and the power
will be restored
• Do not submerge the motor housing,
cord or plug in water or any other
liquids
• Clean all parts after each use; please
refer to the cleaning instructions on
page 18
• If your ingredients include raw meat,
make sure the bowls and attachments
are cleaned thoroughly, immediately
after use
• When using a dishwasher, always set it
to the lowest setting (max 40ºC) and
keep bowls and accessories well away
from the heating elements. Avoid the
drying cycle.
SAVE THESE
INSTRUCTIONS
In the interest of improving products,
Dualit Ltd. reserves the right to change the
product specification without prior notice.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety
• When moving the processor, use both
hands and lift holding the base unit.
Never lift the processor using the bowl
handle
• Never tamper with the safety systems.
They are included for your personal
safety
• The blades and discs are extremely
sharp; take extra care when handling
these parts, especially when removing
from the bowl, emptying the bowl and
during cleaning. Avoid touching the
sharp edges
• The use of attachments not
recommended or sold by Dualit may
cause fire, electric shock or injury to the
user or the appliance
• Use the spatula only when the unit is
turned off, the blade or discs are
removed and the processor is
unplugged
• Store the tool tray out of reach
of children
• Never operate the processor with the
bowls empty.
• Do not misuse the processor; it is
designed for use with food items
only
• Before each use, check that the
bowls contain only the ingredients
and nothing else
• Do not process boiling or hot liquids
• Bowls and attachments are not
suitable for microwave use
• Ensure the bowl(s), accessory(s),
lid and food pusher are all securely
in place before turning the processor
on. It will not work without the large
bowl and lid in place and locked
• Only use the food pusher supplied
to insert and push ingredients down
the feeder tube. Never use your fingers
or utensils; this could cause severe
injury and also damage the appliance
• Do not overfill the bowls; ingredients
need room to move around. Use the
maximum loading chart on page 21 for
reference
• Always turn the power off via the
control knob before opening the lid
• Switch off the appliance and disconnect
from supply before changing accessories
or approaching moving parts while in
use
• Never remove the bowl or lid until the
blades or discs have come to a
complete stop
• Never touch moving parts or insert
your hand or utensils into the bowl.
Use the food pusher provided to guide