beautypg.com

DeLonghi KF8150M User Manual

Page 4

background image

Open

Lock

Fig.4

Fig.5

Fig.6

Blender KF8150

4

Using the "P" function

The "P" (pulse) function improves control for short periods of
processing.
The appliance functions as long as the knob is kept in the "P"
position.

Cleaning the appliance
NEVER IMMERSE the motor base in water!
Make sure the appliance is unplugged from the mains socket.
• Remains of the ingredients being processed must be removed

with a spatula. In models with a plastic blender jar, use a rubber
spatula to avoid scratching the surface.

• Pour lukewarm water into the blender jar, filling to the halfway point.

Operate the appliance for a few seconds then empty the jar.
Repeat the operation if possible.

• Remove the blender jar, lid and measuring cup and wash in luke-

warm water. Rinse and dry thoroughly.

• To facilitate cleaning, in certain models the blade unit can be

removed as follows:

1. Remove the jar from the base and turn it upside down.
2. Insert the hooks on the end of the measuring cup into the

notches on the bottom of the upturned jar (see fig. 4).

3. Turn the measuring cup clockwise (fig. 5) as far as it will go then

pull until the blade unit is released (fig. 6).

4. Wash, dry, then reassemble, taking care to replace the gasket

correctly. Position the blade unit on the bottom of the jar,
pressing down until it fits in place, then use the measuring cup
to rotate the blade unit anticlockwise as far as it will go.
The blender jar and all plastic components must not be washed
in the dishwasher or in boiling water.

• Take care when handling the glass jar to avoid violent impact.
• Clean the motor base and power cable with a damp cloth or

sponge.
Dry thoroughly with a soft cloth.

• Wrap the power cable carefully around the bottom of the

motor base.

Suggestions for use

1 General
• In order to get results and not risk that the ingredients spill out of

the blender jar, add the ingredients to the jug a little at a time.

• Do not fill the jar more than full – the movement of the blades

will increase the volume of the ingredients in the jug. The
recipes which use large quantities of ingredients should be
processed in batches.