Ultrasonic humidifier, Structure, Operation – NewAir AU-200E User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STRUCTURE

Ultrasonic Humidifier

MODEL No. AU-200E

1. Mist outlet

2. Handle
3. Watertank
4. Water inlet Cover

Energ\ exchanger

6. Humidifying indicator
7. Power indicator
8. Tinier indicator

9. On/Off button

10. Timer button

OPERATION

1. Place the humidifier on a clean dry surface that is

lu\ cl and stable. The unit should not be in direct

sunlight.

2. Lift the watertank and unscrew the water intake

knob, pour in clean water. (See illustrations at right)

3. Replace the water tank intake knob, wipe away any

water on the outside of the lank. Pul the lank co\cr
back on the unit.

4. Plug the humidifier into the electrical outlet.

Push the power button, and the mist will begin coming from the mist outlet in

few minutes.

6. To set the timer. Press the timer button to choose working time from one hour

lo eight hours.

7. The humidifier can work up to 10 hours on a full tank of water.
8. This humidifier has a safely features which will turn the unit off if the water n

out or if the circuit is overheated.

9. As with any electrical appliance, close supervision of the humidifier is still re

while it is in use.