Vom-73snwin operations manual – ASA Electronics VOM-73SNWIN User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VOM-73SNWIN OPERATIONS MANUAL
FUNCTIONS AND OPERATION
Front of Monitor : See FIGURE 4
1. Power switch
2. Camera selection
3. Day/ Night switch
4. Contrast
5. Brightness
6. Volume
STAND- BY Monitor operates when vehicle transmission is switched into
"REVERSE" ON - monitor and system operate when ignition switch is "ON"
"Right' used mainly for rear mounted camera or as specified by the installer.
"Left" & "Back" and used mainly for side or mirror mounted camera or as specified by the installer.
Pre-set brightness and contrast levels optimized for day or night operation.
Variable control of contrast. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
Variable control of brightness. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
Variable control of internal speaker volume and output audio level.
FUNCTIONS
AND
OPERATION
CONTINUED
Right of monitor : See FIGURE 4
7. POWER CONNECTION :
(6) (5) (4)
(3) (2) (Î)
Pin No.
Description
I
Power ( DC lOV ~32V)
2
Trigger3 (DC 12V ~24V)
3
Ground
4
N/C
5
Trigger I (DC 12V~24V)
6
Trigger2 (DC 12V~ 24V)
VOM-73SNWIN