Arcam Alpha 5 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TECHNICAL SPECIFICATION
ALPHA 5 FM TUNER
FM Tuning range
Tuning system
Frequency step
Presets
Sensiri\-ity (IHF^
Alternate channel selectivity
AM suppression ratio
Capture ratio
Signal Strength meter
sensiri\nty
Frequency response
87.5 to 108.0MHz
Phase-locked-loop
50kHz
16
typically 1.4p,V
better than 60dB
better than 50dB
typically l.SdB
5 segment LED
typically 2jtV to 2mV
20Hz - 12kHz +/- 0.5dB
typically -2dB at 15kHz
Ultimate S/N ratio (CCIR) Mono
Stereo
better than 75dB
better than 72dB
Total harmonic distortion 96MHz reference, 22.5kHz deviation at IkHz
Mono
Stereo
better than 0.10%
better than 0.30% (using MPX filter)
Channel separation (IkHz)
Pilot tone suppression
Output impedance
Minimum recommended load
Output level
Power consumption
Size W/D/H mm.
Weight
better than 40dB
better than 50dB
2kohm
20kohm
850mV at 75kHz detiation
6VA
430 X 230 X 84
2.2kg nett.
3.2kg packed.
Supplied accessories
FM dipole aerial
phono-phono cable
co-ax plug adaptor
mains lead