Note, Setting ^‘speed defrost, Setting "cook by weight – Avanti NOT FOUN MO649TW User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2. SET STAGE 2;
Touch COOK pad then enter proper cooking time and (lower) power level.
(Most 2-stage recipes use lower power for second stage.)
3. Touch START/STOP pad.
NOTE:
* After stage 1 time has elapsed, two beeps sound, signaling the beginning of stage
After total time has elapsed, 4 beeps sound and END appears in display. Touch
RESET pad or open oven door to clear END before starting another cooking function.
>
SETTING ^‘SPEED DEFROST”
1. Touch SPEED DEFROST pad.
2. Enter desired defrosting time by touching correct number pads. Digital timer sets
minutes and seconds from left to right so a single digit can be set ( 5 for 5 seconds) or
up to 4 digits (2405 for 24 minutes 5 seconds).
3. Touch START/STOP pad.
NOTE:
• After time has elapsed four beeps sound and END appears in display.
Touch RESET pad or open door to clear END before starting another cooking function.
' After setting SPEED DEFROST, oven can be programmed to automatically switch to
one ortwo-Stage cooking.
A. For speed defrost and one stage cooking, follow steps above. Before touching
START/STOP pad, touch COOK pad, enter time and power level. Then touch
START/STOP pad.
B. For speed defrost and two stage cooking, follow steps above. Before touching
START/ STOP pad, enter two-stage cooking programs.
>
SETTING "COOK BY WEIGHT”
1. Touch COOK BY WEIGHT pad.
2. Enter the one-digit code by touching the correct number pad.
3. Enter weight.
4. Touch START/STORPAD.
NOTE:
Your microwave oven makes cooking easy. You set the type and weight of food,
and the oven automatically sets the cooking time and power level.
"COOK BYWEIGh T” CODE DESCRIPTIONS
CODE
TYPE
MAX WEIGHT
1
Beef
51b.
2
Mutton
5 lb.
3
Pork
5 lb.
Meat must be defrosted and at refrigerated temperature.
Weight must be in pounds and ounces.
Ounce weights less than 10 must be preceded by a 0. if label gives weight in
pounds only, change the fraction of a pound to unces using the following chart.
13