Specifications – Dixon SPEEDZTR 30 User Manual
Page 17
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
SpeedZTR™ 30
Chassis:
11 gauge welded channel frame
Body:
Body parts are made of rotational molded polyethylene.
Mower Deck:
11 gauge stamped steel construction. Single 30” cut
blade. Cut height approximately 1-1/2” - 4” via 7-
position lift handle.
Blade Drive:
Mechanical; hand lever engagement.
Transmission:
Each rear wheel is independently driven by a Hydro
Gear EZT self contained hydrostatic drive.
Engine:
13 HP Briggs & Stratton Intek, 4-cycle, single cylinder,
air-cooled, gasoline, vertical shaft, aluminum head and
block, cast iron sleeve, AVS balanced.
Starting
Electric-key switch operation with safety interlock
System:
on parking brake, steering levers and blade drive.
Tires:
Front 11 x 4.00-5 smooth tread (16-21 PSI)
Rear 18 x 6.50-8 turf tread (8-14 PSI)
Capacities:
Fuel
.75 gallon
Engine Oil
1.25 quarts
Dimensions:
Width
33.5” outside rear wheel measurement
Width
38” overall width of deck with deflector
Height
40.25” to top edge of seat
Length
67” hitch tab to front
Weight
393 lbs.