Adcom GCD-700 - Manual (Page 11)

DISC SKIP +/-
m
Press this button to skip over to the next disc in either direction. This control can be used with the drawer in the open position
when loading a disc in the rear-most position.
DISC 1 • DISC 5
m
Press the appropriate button to select the disc that you want to play or program.
CALL®
Press this button to browse through the tracks that have been programmed into the GCD-700’s memory. See the section on
PROGRAMMING THE GCD-700 for further details.
POLARITY dz)
Press this button to change the output polarity of the player. Please refer to the section on FRONT PANEL CONTROLS for
more information about this feature.
RANDOM ®
Press this button to start the random function. Please see the section on FRONT PANEL CONTROLS for more information.
CHANGING THE BATTERIES IN THE RC-700CD REMOTE CONTROL
• Remove the cover on the back of the remote control.
• Insert two fresh AA, 1.5 volt (R6P) batteries. Foilow the polarity indications on the inside of the case for correct orientation.
• Replace the cover on the back panel of the remote control.
NOTE
THE REMOTE CONTROL UNIT WILL NOT FUNCTION PROPERLY UNLESS FRESH BATTERIES OF THE PROPER
TYPE ARE INSTALLED. TO PREVENT POSSIBLE DAMAGE CAUSED BY LEAKING BATTERIES, REMOVE THE
BATTERIES FROM THE REMOTE WHENEVER IT WILL NOT BE USED FOR AN EXTENDED PERIOD OF TIME.
CARING FOR YOUR GCD-700
Great care has been taken by ADCOM to ensure that your new CD player is as flawless in appearance as it is electronicaily.
The front panel is a heavy gauge, high grade aluminum exhrusion carefully finished and anodized for durability. The chassis, top
cover and rear panel are heavy gauge steel that has been powder coated and baked to ensure a lasting finish. If the front
panel, top or sides become dusty or finger printed, they can be cleaned with a soft lint free cloth, slightly dampened with a very
mild detergent solution or glass cleaner.
WARNING
DO NOT SPRAY OR POUR LIQUIDS OF ANY KIND ON THE SURFACES OF THE GCD-700.
PRECAUTIONS
Be sure to connect the AC power cord only to a correct source of power. The operating voltage and frequency for which the unit
was manufactured is printed on the rear panel of the player.
Do not handle a compact disc, operate the GCD-700, or unplug it from its source of power when your hands are wet.
Do not attempt to open the unit or remove its cover. There are no user serviceable parts inside the player and there is the
potential of shock and radiation hazards within the unit.
Do not place any objects other than compact discs in or on the CD drawer, or permit objects to fall inside the player as damage
may result.
9